Introducing the Omron Compressor Nebulizer NE-C801KD

This product was developed in conjunction with respiratory therapists for the successful treatment of asthma, chronic bronchitis, allergies and other respiratory disorders. The compressor forces air to the nebulizer kit. When the air enters the nebulizer kit, it converts the prescribed medication into an aerosol of microscopic droplets that can easily be inhaled. This is a medical device. Operate the device only as instructed by your doctor and/or respiratory therapist.
NE-C801KD includes the kids accessories to enable children to feel more comfortable while inhaling. It improves compliance with drug treatment.

Priced at approximately $59.99, it offers an effective solution for managing respiratory conditions at home.

How the nebulizer kit works

The medication that is pumped up through the medication channel is mixed with compressed air which is generated by a compressor pump. The compressed air mixed with medication is turned into fine particles and sprayed when in contact with the baffle.

Intended use

Know your unit

Omron Compressor Nebulizer NE-C801KD Accessories

Preparing the nebulizer for use

Warning

• Clean and disinfect the nebulizer kit, kids accessory, mask or mouthpiece before using them for the first time after purchase.

• If the device has not been used for a long period of time, or if more than one person uses the same device, clean and disinfect the nebulizer kit, kids accessory, mask or mouthpiece before using them.

Note: Make sure that the air filter is changed regularly. 

Connecting AC adapter

1. Make sure that the power switch is turned off.
   Check that the power switch is in the off () position.
2. Insert the power plug of the AC adapter into the power connector on the compressor.

3. Plug the AC adapter into a power outlet.

   

   Note: When disconnecting the AC adapter, unplug the AC adapter from the power outlet before removing the power connector on the compressor.

Adding medication and assembling the parts

1. Remove the mask or mouthpiece, kids accessory and cap from the nebulizer kit.
2. Remove the inhalation top from the medication tank.
   1. Rotate the inhalation top anti-clockwise.
   2. Lift the inhalation top out of the medication tank.
3. Add the correct amount of prescribed medication to the medication tank.
   Caution: The capacity of the medication tank is 2 to 7 ml.
   Note: Scales on the nebulizer kit are for reference only. The scale on the outside of the tank is with no vaporiser head in place. Please use the scale on your syringe or vial for accurate measurement of medication.
4. Make sure that the vaporiser head is securely attached to the inhalation top.
5. Put the inhalation top back inside the medication tank.
   1. Align the protrusion on the inhalation top with the indent on the medication tank, as shown.

   2. Rotate the inhalation top clockwise and align with the medication tank until they click in place.

      

6. Attach the cap, kids accessory, mask or mouthpiece to the nebulizer kit.
   1. Attach the cap to the inhalation air inlet.
   2. Attach the kids accessory to the inhalation top.
   3. Attach the mask or mouthpiece to the inhalation top.
      Note: If the amount of aerosol is too small, it is not necessary to place the cap.
7. Attach the air tube.
   1. Twist the air tube plug slightly and push it firmly into the air tube connector on the compressor.

   2. Twist the air tube plug slightly and push it firmly into the air tube connector on the medication tank.

      

      Notes:

      • Make sure that the air tube is securely attached to the compressor and nebulizer kit, and does not come loose. Twist the air tube plug slightly when inserting it into the air tube connectors to avoid the air tube disconnecting during use.
      • Take care not to spill the medication when attaching the air tube. Keep the nebulizer kit upright.

Taking medication

1. Hold the nebulizer kit as indicated on the right.
   Caution: Do not tilt the nebulizer kit at an angle of greater than 45° in all directions. Medication may flow into the mouth or it may result in not nebulizing effectively.
2. Press the power switch to the on ( I ) position.
   The compressor starts and nebulization starts.
   Note: Observe whether aerosol is generated.
   To stop nebulization
   Press the power switch to the off () position.
   Warning:
   Do not cover the compressor with a blanket or towel etc., during use.
   Caution:
   • Do not block the air filter cover.
   • Limit use to 20 minutes at a time, and allow a 40 minute interval before using the device again.
   • When using the device, the main unit may become hot.
   • Do not touch the main unit for other than necessary operation such as turning off the power while nebulizing.
     Note: Do not leave the compressor on for a long period of time. This could result in the compressor overheating or malfunctioning.
3. Inhale medication according to your doctor’s and/or health care adviser’s instructions.
   • Attach the mask so that it covers your nose and mouth and inhale the medication.
   • Exhale through the mask.
   • Using the mouthpiece
   • Insert the mouthpiece into your mouth and inhale the medication breathing normally.

   • Exhale as normal through the mouthpiece.

     

4. When treatment is complete, turn the power off. Check that there is no condensation or moisture in the air tube and unplug the device from the power outlet.
   Warning: Condensation may occur in the air tube. Do not store the air tube while it contains condensation or moisture. This could result in infection via bacteria.
   If there is moisture or liquid remaining in the air tube, be sure to follow the procedure below to remove any moisture from within the air tube.
   • Make sure that the air tube is still connected to the air connector on the compressor.
   • Unplug the air tube from the nebulizer kit.

   • Turn on the compressor and pump air through the air tube to expel the moisture.
     Use the nebulizer kit holder as a temporary holder for the nebulizer kit. 
     Note: Align the mark on the unit with the mark on the nebulizer kit as shown

     

Technical data

• Name: COMP AIR
• Model: NE-C801KD
• Type: Compressor Nebulizer
• Rating (AC adapter): 100 - 240V ~ 350mA, 50/60Hz Rating
• (Compressor Nebulizer): 12V 0.8A
• Operating Condition: Intermittent operation 20min. ON / 40min. OFF Operating Temperature/
• Humidity: +10 to +40°C / 30% to 85%RH Storage Temperature/
• Humidity/Air Pressure: -20 to +60°C / 10% to 95%RH / 700 - 1060 hPa
• Weight: Approx. 270g (compressor only)
• Dimensions: Approx. 142 (W) × 72 (H) × 98 (D) mm
• Contents: Compressor, Nebulizer Kit, Kids Accessories (Smile Bear, Happy Bunny), Air Tube (PVC, 100cm), 5 pcs Spare Air Filters, Mouthpiece, Infant Mask (PVC), Child Mask (PVC), AC adapter, Carrying Bag, Instruction Manual.
• Classification: Class ll equipment, Type B applied part
  • = Class ll equipment
  • = Type B applied part
  • Read the instruction manual carefully
  • = No operation
  • = Power on

Technical data for the OMRON NE-C801KD Compressor with the OMRON V.V.T. (Virtual Valve Technology) Nebulizer kit:

• Particle Size: **MMAD Approx. 3μm MMAD = Mass Median Aerodynamic Diameter
• Medication Tank Capacity: 7ml maximum
• Appropriate Medication Quantities: 2ml minimum - 7ml maximum
• Nebulization Rate: *Approx. 0.3ml/min (by weight loss)
• Aerosol Output: **0.47ml (2ml, 1%NaF)
• Aerosol Output Rate: **0.06ml/min (2ml, 1%NaF)

Measured by OMRON HEALTHCARE Co., Ltd. Independently measured by Prof. Dr. Hiroshi Takano, Department of Chemical Engineering and Materials Science, Faculty of Science and Engineering, Doshisha University, Kyoto, Japan, according to EN 13544-1:2007+A1:2009
Note: Performance may vary with drugs such as suspensions or high viscosity. See drug supplier’s data sheet for further details.

Optional parts and accessories

Description

The Omron Compressor Nebulizer NE-C801KD is designed with user comfort and convenience in mind. The device is compact and lightweight, making it easy to move around. The nebulizer kit is BPA-free and dishwasher safe, ensuring easy cleaning and hygiene. The included mouthpiece and mask allow for versatile use, catering to both pediatric and adult patients. The tubing is long enough to provide flexibility while using the device, allowing patients to move around freely during treatment.

The compressor is built to last with a durable design that withstands frequent use. It also features a built-in filter to ensure clean air intake, enhancing the overall efficiency of the nebulization process.

QUICK MANUAL

Please read the entire manual before using the device.
Warning: Clean and disinfect all the parts before using them.

1. Adding medication 
   1. Rotate the inhalation top anticlockwise to remove.
   2. Add the appropriate amount of prescribed medication.
   3. Make sure the vaporiser head is securely attached to the inhalation top.

   4. Put the inhalation top back and rotate it clockwise until they click in place.

      

2. Assembling kids accessory and mask
   Assemble the nebulizer kit as the following order.
   1. Cap
   2. Kids accessory

   3. Mask

      

      Warning: Do not let infants and children play with the kids accessory. Kids accessory is not a toy, but a component of nebulizer kit.

3. Connecting AC adapter
   Insert the power plug of AC adapter into the power connector of the main unit. Plug the AC adapter into the power outlet.

   

4. Attaching air tube
   Attach the air tube to the main unit and to the nebulizer kit. When do so, twist and push it firmly.

   

5. Applying mask and starting inhalation
   Apply the mask securely. Turn on the power to the main unit.

   

   Use the nebulizer kit holder to place the nebulizer kit

   

Setup Guide

To operate the Omron Compressor Nebulizer NE-C801KD, follow these steps:

1. Assembly: Connect the tubing to the compressor and attach the nebulizer kit to the other end of the tubing.
2. Configuration: Fill the medication cup with the prescribed amount of medication and attach it to the nebulizer kit.
3. Operation: Turn on the compressor and ensure that the nebulizer is producing a fine mist. Inhale the mist through the mouthpiece or mask as prescribed by your healthcare provider.
4. Cleaning: After each use, clean the nebulizer kit according to the user manual instructions.

Important safety instructions

Read all the information in the instruction manual and any other literature included in the box before using the device. When using an electrical product, especially when children are present, basic safety precautions should always be followed including the following: 
Warning: Indicates a potentially hazardous situation which, if not avoided, could result in serious injury.

(Usage)

• For type, dose, and regime of medication follow the instructions of your doctor or respiratory therapist.
• If you feel anything unusual during use, stop using the device immediately and consult your doctor.
• Do not use only water in the nebulizer, for inhaling purposes.
• Clean and disinfect the nebulizer kit, kids accessory, mask or mouthpiece before using them for the first time after purchase.
• If the device has not been used for a long period of time, or if more than one person uses the same device, clean and disinfect the nebulizer kit, kids accessory, mask or mouthpiece before using them.
• Be sure to wash the parts after use, and ensure that they are thoroughly disinfected and dried, and stored in a clean location.
• Keep the device and kids accessory out of the reach of unsupervised infants and children. The device may contain small pieces that can be swallowed.
• Do not let infants and children play with the kids accessory. Kids accessory is not a toy, but a component of nebulizer kit.
• Do not store the air tube while there is moisture or medication remaining inside.
• Do not leave the cleaning solution in the nebulizer parts. Rinse them with clean hot tap water after disinfecting.
• Do not use or store the device where it may be exposed to noxious fumes or volatile substances.
• Do not use the device where it may be exposed to flammable gas.
• Do not cover the compressor with a blanket, towel, or any other type of cover during use.
• Make sure that the nebulizer kit and kids accessory are clean before use.
• Always dispose of any remaining medication after use, and use fresh medication each time.
• Do not use in anaesthetic or ventilator breathing circuits.

(Risk of electrical shock)

• Do not use the compressor or AC adapter while they are wet, or connect them to a power outlet or other devices with wet hands.
• The compressor and AC adapter are not waterproof. Do not spill water, or other liquids, on these parts. If liquid does spill on these parts, immediately unplug the power cord and wipe off the liquid with gauze or other absorbent material.
• Do not immerse the compressor in water or other liquid.
• Do not use or store the device in humid locations, such as a bathroom.
• Use only original OMRON AC adapter. Use of unsupported AC adapter may damage the device.
• Do not operate the device with a damaged power cord or plug.
• Keep the power cord away from heated surfaces.
• Read and follow the “Important information regarding Electro Magnetic Compatibility (EMC)” (page 24) in the Technical Data Section.

Cleaning and daily disinfecting

Cleaning

Following the cleaning instructions after each use will prevent any remaining medication in the tank from drying, resulting in the device not nebulizing effectively and also for preventing infections.
Warning:
Thoroughly rinse the nebulizer kit, kids accessory, mask or mouthpiece with clean hot tap water after each use, and disinfect them after the last treatment of the day.

1. Make sure that the power switch is in the off () position.
2. Disconnect the AC adapter from the wall outlet and the compressor.
3. Remove the nebulizer kit from the air tube and disassemble the nebulizer kit. Refer to Section 2 (page 12-13).
4. Discard any remaining medication in the medication tank.
5. Wash all the nebulizing parts in warm water and mild detergent and rinse in clean hot tap water.
6. After cleaning and disinfecting the parts, rinse them thoroughly with clean water and allow the parts to air dry in a clean environment.
   Note: Do not start operation before the cleaned parts are completely dried.
7. If the compressor or the outside of the air tube are dirty, wipe them clean with a soft cloth moistened with water or mild detergent.
   Caution: The compressor is not waterproof.
8. Reassemble the nebulizer kit. Put it in the carrying bag.

Disinfecting the nebulizing parts

• Always clean before disinfection. 
• Always disinfect the medication tank, mouthpiece and other nebulizing parts after the last treatment of the day. For appropriate method of disinfecting each part, refer to page 18.

To disinfect the parts, use one of the methods described below:

A. Use a commercially available disinfectant. Follow the instructions provided by the disinfectant manufacturer.

1. Submerge the parts in the cleansing solution for the specified period.
2. Remove the parts and discard the solution.
3. Rinse the parts with clean hot tap water, shake off excess water and allow to air dry in a clean environment.

B. Parts may be boiled between 15 to 20 minutes. After boiling, carefully remove the parts, shake off excess water and allow to air dry in a clean environment.
Note: Do not boil air tube, mask, kids accessory, air filter and air filter cover.

Caution: Do not use an autoclave, EOG gas disinfection or low temperature plasma sterilizer to disinfect the device.
Note: The printing may come off the surfaces of kids accessories as a result of repeated washing and disinfecting.

Handling the Vaporiser Head
The vaporiser head is an important part that is used to vaporise medication. Be sure to observe the following precautions when handling it.

Caution:

• Always wash the vaporiser head after each use.
• Do not use a brush or pin etc., to clean the parts.
• When disinfecting the parts by boiling, be sure to boil them in plenty of water.
• Do not boil vaporiser head together with other objects, other than applicable nebulizer accessories.
• Do not use a microwave oven, dish dryer or hair dryer to dry parts.

Use the table below as a guideline to select a method for disinfecting.

O: applicable ×: not applicable

An example of a commercially available disinfectant.

Maintenance and storage

To keep your device in the best condition and protect the device from damage follow these directions:

Caution:

• Do not leave the device unattended with infants or persons who cannot express their consent.
• Do not subject the device or the parts to any strong shocks such as dropping the device on the floor.
• Do not carry or leave the nebulizer kit while the medication tank contains medication.

Notes:

• Do not store the device in extreme hot or cold temperatures, high humidity or under direct sunlight.
• Do not crease or fold the air tube.
• Dispose of the device and any used accessories or optional parts according to applicable local regulations.
• Never clean with benzene, thinner or a flammable chemical.

Always transport the device in its carrying bag, and store the device in the bag if it will not be used for a long period.

Note: Nebulizer kit should be replaced after using for one year.

Changing the air filter of Omron Compressor Nebulizer NE-C801KD

If the air filter has changed colour, or has been used on average for more than 60 days, replace it with a new one.

1. Pull the air filter cover off the compressor.
2. Change the air filter.
3. Put the air filter cover back in place.

Notes

• Use only OMRON air filters designed for this device. Do not operate without a filter.
• There is no front or back orientation for the air filters.
• Check that air filters are clean and free of dust before inserting them.
• Do not attempt to wash or clean the filter. If the air filter becomes wet, replace it. Damp air filters can cause blockages.
• To prevent the air filter cover from becoming blocked, wash the cover regularly. Do not boil the air filter cover. Remove the air filter cover, wash it, and make sure it is dry and reattached correctly.
• Please contact an authorized OMRON distributor for additional air filters, or if the parts supplied with the device are damaged or missing.

Troubleshooting

Check the following if your unit should fail during operation. You can also refer to the pages of this manual for complete instructions.

Note: If the suggested remedy does not solve the problem, do not try to repair the device - no parts of the unit are user serviceable. 
Please contact an authorized OMRON distributor.

Pros & Cons

Pros

• Efficient Nebulization: Quick and effective nebulization rate ensures fast treatment sessions.
• Quiet Operation: Less than 60 dB noise level makes it suitable for use in any environment.
• Durable Design: Built to last with robust materials and a built-in filter for clean air intake.
• Easy Cleaning: BPA-free and dishwasher-safe nebulizer kit for easy maintenance.
• Versatile Use: Includes both mouthpiece and mask for use by pediatric and adult patients.

Cons

• Size and Portability: Although compact, it may not be as portable as some other models due to its size and weight.
• Power Dependency: Requires a power source to operate, which can be a limitation for travel or power outage situations.
• Noise (Relative): While quieter than some models, it may still produce noticeable noise during operation.

Customer Reviews and Common Complaints

Customers have generally praised the Omron Compressor Nebulizer NE-C801KD for its effectiveness and ease of use. However, some common complaints include:

• Size and Weight: Some users find it slightly bulky compared to other nebulizers on the market.
• Noise Level: A few users have mentioned that while it is quieter than other models, it still produces some noise that can be bothersome in quiet environments.