Introduction

The Jensen FM Alarm Clock Radio CD Player JCR-310 is a multifunctional device that combines an FM radio, alarm clock, and CD player, making it a versatile addition to any bedroom. Launched in 2015, this product is manufactured by Jensen, known for its reliable audio equipment. Priced around $49, the JCR-310 features a sleek design, easy-to-read display, and dual alarm settings, providing users with a convenient way to wake up to their favorite music or radio stations.

LOCATION OF CONTROLS

CD Door
Power On/Standby; FUNCTION button
DISPLAY button
TIME SET/MEMORY/MEM+ button
ALARM 2/VOLUME- button
ALARM 1/VOLUME+ button
SNOOZE /SLEEP button
CD PROGRAM button
CD REPEAT button
Tune/Skip/Search Backward button
Tune/Skip/Search Forward button
CD STOP button
CD PLAY/PAUSE button
SPEAKERS
PM Indicator
ALARM 1 - Beeping Indicator
MUSIC 1 - Wake to CD/Radio/AUX Alarm Indicator
REPEAT Indicator
ALARM 2 - Beeping Indicator
MUSIC 2 - Wake to CD/Radio/AUX Alarm Indicator
CD Door Open Button
AC Power Cord
FM Wire Antenna
LED Display
AUX-IN Jack
Back-up Battery Compartment (inside the CD compartment)

Specifications

Power Requirement

Main Unit: 120V~ 60Hz
Backup Battery for Clock: 2 x 1.5V “AA” (UM-3)

Frequency Range

Radio Band
- AM 520 – 1710 KHz
- FM 87.5 - 108 MHz

Power Consumption

Main Unit: 10 Watts

Description

The Jensen JCR-310 is built with a sturdy plastic body and features a sleek, modern design. The front panel includes intuitive buttons for easy navigation through the various functions. The device comes with a detachable antenna to improve FM radio reception. The CD player is top-loading, making it easy to insert and remove CDs. The LCD display is backlit, ensuring visibility in low-light conditions.

The JCR-310 also includes an AUX input port, allowing you to connect your smartphone, MP3 player, or other external audio devices. A headphone jack is also provided for private listening. The device runs on AC power but has a battery backup option using two AAA batteries, ensuring that your alarms and settings are retained during power outages.

POWER SOURCE

This unit operates using standard 120V~ 60Hz AC household power and 2 “AA” size (UM-3) batteries (Not included) for alarm clock backup.

AC POWER CONNECTION

Plug the AC power cord into a standard 120V~ 60Hz AC wall outlet.
Tap the Power On/Standby button to turn on the unit.
Tap the FUNCTION button to change the operation mode.
Press and hold the Power On/Standby button to turn the unit into “STANDBY” mode after you finish listening.

BATTERY BACK-UP FOR CLOCK SETTINGS
The battery back-up compartment is located inside the CD compartment.

Open the CD door and remove the battery compartment door.
Follow the polarity diagram shown inside the compartment and install 2 x AA (UM-3) batteries (not included).
Replace the battery compartment door.

NOTE: Only use a well-known brand of battery to ensure the longest life and best performance.

BATTERY CARE

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
Only batteries of the same or equivalent type as recommend are to be used.
If the unit is not to be used for an extended period of time, remove all batteries. Old or leaking battery can cause damage to the unit and may void the warranty.
Do not dispose batteries in fire. Batteries may leak or explode.
Danger of explosion if battery is incorrectly replaced.

CLOCK SETTING

With the unit in Standby mode, press and hold the TIME SET button for about 1 second or until the “hour digits” begin to flash on the display.
Press the /buttons to adjust the hour.
NOTE: Make sure the hour is set so that PM indicator is displayed correctly.
When the correct hour is selected, press the TIME SET button to confirm and the “minute digits” will begin to flash on the display.
Press the / buttons to adjust the minutes.
When the correct minute is selected, press the TIME SET button again to complete the setting.

ALARM OPERATION

SETTING THE ALARMS

With the unit in Standby mode, press the ALARM 1 or ALARM 2 button to select the ALARM wake up sound mode - “Beeping Alarm”, “Music from CD”, “Music from your external music player via AUX IN” or “Last AM/FM radio station you listened to (this will depend on what you last listened to before putting the unit into Standby mode)”. The relative alarm indicator ALARM 1/ALARM 2 or MUSIC 1/MUSIC 2 will light up to show your selection.
If you select Wake to music, please set the volume level of music/radio with the power ON before putting the unit into Standby mode. The volume you set will be the same volume level that you come on when the alarm time is reached.
Note:
- For Wake to music from CD, please make sure a CD is inserted and can be properly played, otherwise the unit will default to the “Beeping” alarm sound automatically. Make sure the CD inserted can be played properly at desired volume level before you turn the unit into Standby mode for next day wake up alarm.
- For Wake to music from AUX, please make sure your external player has been properly connected to JCR-310 and has sufficient power to maintaining it’s continually playback before you turn the unit into Standby mode for next day wake up alarm. The unit that is connected to the AUX-IN must be left playing continuously in order to play properly when the wake time is reached.
- If you select Wake to music from Radio, make sure your AM/FM radio station is set to the station you want to be woken up to. The JCR-310 will play the last radio station you listened to when the wake time is reached.
After selecting the alarm sound mode, press and hold the respective ALARM button. The alarm “hour digits” will begin to flash on the display. Press the /buttons to adjust the alarm hour.
NOTE: Make sure the hour is set so that PM indicator is displayed correctly for the chosen wake time.
When the correct alarm hour is selected, press the corresponding ALARM button to confirm and the alarm “minutes digits” will begin to flash.
Press the /buttons to adjust the alarm minute.
When the correct alarm minute is selected, press the corresponding ALARM button to complete the setting.

TURNING THE ALARMS ON AND OFF

After you have set alarm time, tap the ALARM 1 or ALARM 2 button repeatedly to select the alarm function.
Tap the respective alarm button to the wake up mode you desired and then wait for few seconds to confirm. The alarm clock stops flashing and selected alarm indicator ALARM 1 / ALARM 2 or MUSIC 1 / MUSIC 2 lights steadily.
Tap the respective alarm button to OFF mode if you want to turn off the next day alarm.

The corresponding alarm indicator goes off.

WAKE TO BEEPING ALARM

The Beeping Alarm will automatically turn on when the alarm time is reached. The respective ALARM 1 or ALARM 2 indicator will blink.
The beep alarm will sound for 60 minutes and then turn off automatically if the snooze button is not pressed.
To stop the beep alarm sound immediately, tap the Power button.

WAKE TO MUSIC

When the alarm time is reached, the unit will automatically turn on the CD, AUX or Radio mode based on the last mode you were listening to before switching the unit to Standby mode. The respective MUSIC 1 or MUSIC 2 alarm indicator will blink.
The alarm sound level will be the last volume level you listened to.
The music alarm will sound for 60 minutes and then turn off automatically if the snooze button is not pressed.
To stop the music alarm immediately, tap the Power button.

SNOOZE FUNCTION

When the alarm sounds, it can be temporarily stopped by pressing the SNOOZE button. The alarm sound will be suspended but the relative alarm indicator will keep flashing.
The alarm will turn off for 9 minutes and then come again.
This manual snooze operation can be repeated again and again during alarm sounding period.

LISTENING TO RADIO

Radio Tuning

Tap the / FUNCTION button repeatedly to select AM or FM radio mode.
To manually tune to a desired station, repeatedly tap the/ buttons.
To automatically search for stations with strong signals, press and hold either of the /buttons until the frequency digits on display begins to scan then release the button. The tuner will stop on the first strong station it finds.
Press the Volume Up (+) and Volume Down (-) buttons to adjust the volume output level.
Tap the DISPLAY button to show the current station frequency on the display. The station frequency will revert back to show the time automatically after about 5 seconds.
Press and hold the / FUNCTION button to turn unit into standby mode after listenning.

Notes:

Manual tune to select weaker stations that might be skipped during automatic tuning.
If the automatic tuning does not stop on the exact frequency of the station, for example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning method to "fine tune" to the exact frequency of the desired station.

HINTS FOR BEST RECEPTION:

AM - The AM antenna is located inside the cabinet of the unit. If AM reception is weak, change the position of unit until the internal antenna picks up the strongest signal.
FM - To insure maximum FM tuner reception, unwrap and fully extend the FM antenna wire for the best FM radio reception.

Radio Station Presets
The unit allows you to store up to 10 AM and 10 FM stations for easy recall at any time.

Setting Preset Stations

Tap the / FUNCTION button to turn on the unit.
Tap the / FUNCTION button to select AM or FM radio mode.
Tune to the radio station you want to store in memory by using the / buttons.
Press and hold the MEMORY button, the preset channel number appears on display and blinks.
To select desired preset station number, tap the/ buttons.
To confirm preset location, tap the MEMORY button.
Repeat steps 3 to 6 to store other stations if necessary.

Notes:

There is an approximate 7 seconds delay when programming, after 7 seconds, the unit will automatically switch back to normal tuner mode.
You can overwrite a preset station by overwriting and storing the new frequency in its place.

Recalling a Preset Station

Tap the / FUNCTION button to turn on the unit.
Tap the / FUNCTION button to select AM or FM radio receiving mode.
To select desired preset channel, tap the MEM+ button repeatedly.

CD OPERATION

This CD player not only plays commercial CDs, but also self-compiled CD-R/RW discs. Do not attempt to play any of the following formats: CD-ROM, CDI, VCD, DVD or computer CDs.

NOTES ON CD-R/RW DISCS

Because of non-standardized format definition/production of CD-R/RW, playback quality & performance are not guaranteed.
Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as PC performance, writing software, media ability, etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.

INSERTING AN AUDIO CD DISC

Press the OPEN button to open the CD door. Carefully place an audio CD disc with its label side facing upward in the CD compartment and gently close the CD door.
Tap the / FUNCTION button to turn on the unit.
Tap the / FUNCTION button to select CD mode.
The unit will read the CD disc automatically, display will briefly show flashing “- -” then the total number of tracks on the CD.
If no disc is inserted or if the inserted disc is not recognized, the display will show the message “NO”. If the CD door is not closed, the display will show “OP”.

NOTES:

Keep the CD door closed when the system is not in use to prevent dirt and dust from entering the CD mechanism.
Never place more than one CD in the CD tray. If two discs are loaded at the same time, the CD mechanism may jam and / or the discs themselves may be damaged.

AUDIO CD DISC PLAYBACK

When the CD door is closed and a CD is inside, press the PLAY/PAUSE button to start CD playback.
Adjust the VOLUME control to obtain the desired sound level from the Built-in Speakers.

IMPORTANT!!
If the disc is smudged or scratched it may skip or stop completely. This does not indicate a problem with the player. If this occurs, try playing another disc. If that disc plays properly, you may assume that the first disc is damaged and unplayable.

PLAY/PAUSE MODE

To temporarily stop playback while the CD disc is playing, press the button once. The track number playing will be flashing, playback is now paused.
The sound pauses, but the disc will continue to spin. To re-start playback, press the button again. The music will start from the exact position where it was paused.
In clock display mode, tap the DISPLAY button to show the current track number on the display. The current track number will revert back to show the time after 30 seconds.
To stop the CD playback, press the STOP button once.

SKIP and SEARCH MODE

In play or pause mode, press the Tune/Skip/Search Forward button once to skip forward to the next track or repeatedly to skip multiple tracks. Press the Tune/Skip/Search Backward button to return to the beginning of the track, or press the button repeatedly to skip backward several tracks.
During play mode, when the or button is pressed and held, the unit will do a high speed audible search of the track, either forward or backward depending on which button is pressed.

Note: Track number will change to show current time after 30 seconds if no CD operation button being pressed.

REPEAT MODE

Repeat One: In the CD play mode, press the REPEAT button once, the REPEAT indicator will light on the display and flash. This single track of music will be repeated.
Repeat All: In the CD play mode, press the REPEAT button twice, the REPEAT indicator will show on the display steadily. The whole disc will be played repeatedly.
To cancel repeat function Press the REPEAT button repeatedly until Repeat Indicator goes off on the display. Standard playback mode will now resume.

PROGRAM MODE

In CD mode, press the STOP button to stop CD playback, total tracks of the CD will display.
Press the PROGRAM button on unit, the program location and program track number “1:00” will display and program track digits “00” flash.
Press the/ button to choose your desired musical track. For example, track 5 is selected, “05” will show in display and flash.
Press the PROGRAM button again to store this track in memory. The LED display will go to “2:00” and track number digits keep flashing to prompt for input next track
Repeat the above procedures 3 - 4 until all desired tracks are stored. A total of 20 tracks can be stored for CD playback.
After you finish programming 20th tracks, program location display will stop at 20 and will not further advance.
Press the button once to start the program playback.
To cancel the programmed memory, press the button twice or open the CD door during the stop mode.

SLEEP TIMER FUNCTION

The sleep timer allows you to turn the unit off after a designated time is reached.

To activate the sleep timer, turn the unit on and either load a CD, tune to the desired radio station or listening to music via AUX IN.
Tap the SLEEP button and the sleep time appears on the display.
Repeatedly tap the SLEEP button to select a sleep time. The unit will turn off after 10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes. Wait 5 seconds after your selection for the unit to confirm the selection, the unit will play for the selected length of time then automatically turn off.
To cancel the sleep timer, press the SLEEP buttons until timer shows “OFF”, the unit will turn into standby mode after 2 seconds.
To turn the unit off before the selected length of time, press the Power button at any time.

Notes:

To check the remaining sleep time, tap the SLEEP button once.
If you are falling asleep to music from an external device connected to the AUX input, the sleep timer will shut off the power to this system but it will not turn off the external device.

AUXILIARY INPUT OPERATION

This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3 players, CD players and iPods (except iPod shuffle 3rd gen) and listen to your external source through the speakers of this system.

Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
Plug one end into the AUX-IN jack located on the left hand side of the unit and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.
Turn on the external audio device.
Tap the / FUNCTION button to select AUX mode, “AUH” will show on display for few seconds before show current time.
The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.

Note:

If you connected the Line-out Jack of your external device then you only need to adjust the volume control of this system. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this system to find the most desirable volume setting.
Remove the audio cable from AUX IN jack when you finish listening. Don't forget to switch off the power on your external device as well.

Setup Guide

To set up the Jensen JCR-310,

Start by plugging it into a power outlet using the provided AC cord. Insert the batteries for backup power if desired.
Set the time using the TIME button and the +/- buttons.
To set the alarm, press the ALARM button and choose either the radio, CD, or buzzer option. Adjust the volume and other settings as needed.
For FM radio, extend the antenna to improve reception and tune into your favorite stations using the TUNE button.
Save your favorite stations using the PRESET buttons.
For CD playback, simply insert your CD into the top-loading CD player and press the PLAY button.

CARE AND MAINTENANCE

Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
If drop-outs or interruptions occur in the music during CD play, or if the CD fails to play at all, its bottom surface may require cleaning. Before playing, wipe the disc from the center outwards with a good soft cleaning cloth.
Unplug the unit from the electrical power outlet immediately in case of malfunction.

Cleaning the Unit

To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit.

CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.

WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION:
Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICING TO QUALIFIED SERVICE PERSONNEL.

DANGER
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

WARNING
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

Read these Instructions.
Keep these Instructions.
Heed all Warnings.
Follow all Instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not overload wall outlet. Use only power source as indicated.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
This apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek advice from your local qualified service technician or contact the distributor via the telephone number at the back of this instruction manual.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Caution marking and nameplate are located on bottom of product. The symbol for Class II (double insulation)
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. FULLY INSERT THE PLUG TO MAIN POWER SOCKET.

SAVE THESE INSTRUCTIONS

IMPORTANT NOTE
Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
Places subject to constant vibration.
Dusty, humid or moist places.
Sources of electrical noise such as fluorescent lamps or motors.
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting it from mains supply and removing all the batteries. Wait at least for 30 seconds before reconnect the AC power cord or reinstall the batteries.

CAUTION

CLASS 1 LASER PRODUCT
INVISIBLE LASER RADIATION

This product contains a low-power laser device.

Note: This product complies with DHHS Rule 21 Subchapter J at date of manufacture.
Follow the advice below for safe operations.

ON PROTECTION AGAINST LASER ENERGY EXPOSURE

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing.
Stop operation immediately if any liquid or solid object should fall into the cabinet.
Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly.
Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is still open.
This unit employs a laser. The use of controls or adjustment or performance of procedures other than those specified here may result in exposure to hazardous radiation.

ON PLACEMENT

Do not use the unit in places which are extremely hot, cold, dusty, or humid.
Place the unit on a flat and even surface.
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on a carpet.

ON SAFETY

When connecting and disconnecting the AC power, grip the AC cord plastic plug and not the cord itself. Pulling the cord may damage it and create hazard.
When you are not going to use the unit for a long period of time, disconnect the AC power cord from the wall outlet and remove all batteries.

ON AC VOLTAGE

Before use, check that the rated voltage of your unit matches your local voltage.

ON CONDENSATION

When left in a heated room where it is warm and damp, water droplets or condensation may form inside the CD player.
When there is condensation inside the unit, the unit may not function normally.
Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.

Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.

Jensen FM Alarm Clock Radio CD Player JCR-310 Troubleshooting

Symptom	Possible Problem	Solution
Unit does not respond (no power)	AC power cord is not plugged properly into a wall outlet or the connector is not plugged into the AC Socket on the back of the System.	Re-plug the AC power cord into the wall outlet and the connector into AC Socket on the System.
Unit does not respond (no power)	Wall outlet is not functioning.	Plug another device into the same outlet to confirm the outlet is working.
Radio no sound	Unit not in RADIO function mode. Volume set at minimum	Tap FUNCTION button to AM/FM RADIO position. Increase Volume
Noise or sound distorted on AM or FM broadcast	Station not tuned properly for AM or FM. FM: Wire antenna is not fully extended. AM: The reception at the set location is poor.	Retune the AM/FM broadcast station. FM: Fully extend or reposition the FM wire antenna. AM: Change the position for the best reception.

CD disc does not play	Unit not in CD function mode. Audio disc is installed incorrectly. It the disc is self-compiled, the media used may not be compatible with the player.	Select CD mode. Insert audio disc with label side up. Use better quality blank media and retest.
Audio disc skips while playing	Disc is dirty or scratched.	Wipe disc with clean cloth or use another disc.
	Dirty or defective disc	Clean or replace the defective disc Use a lens cleaning disc to clean the lens Relocate the player away from shock or vibration
Intermittent sound from the player	Dirty pick up lens
	Player is subject to excessive shock or vibration
Unit gets warm after extended play at high volume	This is normal.	Turn the unit off a period of time or lower volume.

Pros & Cons

Pros

A multi-functional device combining alarm clock, FM radio, and CD player
Compact and sleek design
Easy to set up and operate
AUX input and headphone jack for added versatility
Backlit LCD display for better visibility
Affordable price point

Cons

No USB port for charging or playing MP3 files
No Bluetooth connectivity
Basic sound quality compared to high-end audio devices
Antenna can be fragile and may break if not handled carefully

Customer Reviews

Customers have generally praised the Jensen JCR-310 for its ease of use and versatility. Many appreciate the multiple alarm settings and the clear LCD display. However, some users have noted that the sound quality is not as robust as expected and that the lack of USB and Bluetooth connectivity is a drawback.

Common complaints

Include issues with FM radio reception and the fragility of the antenna. Despite these minor issues, the JCR-310 remains a popular choice for those seeking a reliable and feature-rich alarm clock radio CD player.

90 Days Warranty about JCR-310

SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable. Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof, except batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of the date of original consumer purchase, such as a duplicate copy of a sales receipt.

Search Manuals in: cd-player

Read More

Read More

Read More

Read More